COP-USA USBDVR04SP - Manual (Page 34)

MAXDVR & DR Series Cards 34
Detection configuration’
(3) Configure working schedule for certain channels in ‘Schedule
configuration’
Schedule Record
Users can set working schedule for all kinds of record modes in
‘Schedule configuration’. The green light in record status panel shows the
corresponding channel is in Schedule Record mode. Users can change record
mode to manual record at any time, and the green light will change into
blue light .
Please refer to chapter 4.4 for details.
Recycling Record
If users enable Recycling Record function and all the selected HDD
partitions are full, the former record data will be covered by the latest record
data.
Users can set recording storage sequence for HDD partitions. The
recording storage will automatically jump to the next partition when it’s full. If all
the partitions are full and recycling record mode has been enabled, the new
data will overwrite the former recorded data automatically. Users can also set
HDD minimum storage alarm. Then once the present storage space is less
then the minimum storage and recycling record mode hasn’t been enabled, the
record will automatically stop.