COP-USA CD59NV-IR35YK - Manual (Page 53)

52
AUTO TRACKING
Under the auto tracking mode, the dome will auto track the
moving objects entering the scene. When the object is moving
out of the scene, the dome will return to a preset position as
defined after the defined time.
SENSITIVITY: The user can set up the auto tracking sensitivity
under this menu. When set as LOW, the dome will do auto
tracking when obvious object entering the screen. When set as
HIGH, the dome will do auto tracking when small object moving
into the screen. Move the cursor there and press the IRIS OPEN
to enter. The options include: LOW, MID and HIGH.
TARGET: To set up the size of the tracking object. The options
include Large. MID and SMALL.
AUX: If set “ON” here, the object auto tracking will activate alarm
aux output at the same time. Press IRIS OPEN to enter to select
“ON” or “OFF”
ZOOM MATCH: Under the auto tracking model, if turn on the
function of ZOOM MATCH, the dome will do zooming in and out
during auto tracking to keep the right proportion between the
object and background. Move the cursor there and press the IRIS
OPEN to enter. And move the joystick to select the optical zoom.
ENABLE: Move the cursor here and press IRIS OPEN to enter to
select “ON” or “OFF” to enable or disable this function.
TRACKING SCENE SET: Here the user can set up the scene that
the dome will get back to when finishing the action of auto
tracking. Move the cursor here and press IRIS OPEN to enter.
Move the dome to the wanted scene and press IRIS OPEN to
confirm.
DELETE: Move the cursor here and press IRIS OPEN to delete the
return scene.
RETURN DELAY: To set up the time that dome will waiting to
return to this scene.
RESTART