COP-USA CD59NV-IR35YK - Manual (Page 51)

50
TIMING ACTION
TIMING ACTION allows the user to set up the actions of the
dome in 7 days (each day with 8 timing segments). When
fishing the setup, the dome will do the actions according to
the setup motion during the defined time segment.
NO.: Here shows the day within a week. Move the cursor here
and press IRIS OPEN to enter. Move joystick up or down to
select the Serial No. (1‐8) for the timing action. Press IRIS
OPEN to confirm.
START: To set up the start time for the defined motion within
this time segment. Press IRIS OPEN to confirm.
STOP: To set up the stop time for the defined motion within
this time segment. Press IRIS OPEN to confirm.
MOTION: To setup the motion that will be operated in this
time segment. The motion includes: NONE. PRESET 1‐8, SCAN
1‐4, SEQUENCE 1‐4 and PATTERN 1‐4.
ON/OFF: Move the cursor here and press IRIS OPEN to enter to
enable or disable this function. Press IRIS OPEN to confirm.
COPY: The user could set up each 8 segment of 7 days
separately or can copy the finished setting for one day to the
current day. Move the cursor there and press IRIS OPEN to
copy the settings.
BACK: Press IRIS OPEN to save and be back to last menu.
NOTE: It is not allowed to set up the same time segment
during one day. And the time segment can not exceed 00:00.
During the timing action segment, the defined action will be
stopped if the user moves the dome. If there is operation
during the defined time segment, the action will re‐activated
as long as it is in the defined timing action segment.