Pattern tour – COP-USA CD59NV-IR35YK User Manual

Page 49

Text mode
Original mode

PATTERN TOUR

The dome supports 4 pattern tours and each pattern cover at
most 10 Minutes of 500 commands. Please check the following
steps to set up a pattern.

1) PATTERN NO.: Move the cursor here and press IRIS OPEN

to enter the setup of Pattern Number. Move the joystick to
select a pattern number (14) and press IRIS OPEN to
confirm.

2) TITLE: Move the cursor here and press IRIS OPEN to enter

the setup of Pattern Title. Check the detailed above in
DOME TITLE settings.

3) : Move the cursor here and press IRIS OPEN to enter.

Move the dome up/down/left right, make the zoom in/out
and press IRIS OPEN to save the pattern tour.

4) START: Move the cursor here and press IRIS OPEN to start

the current pattern tour.

5) DELETE: Move the cursor here and press IRIS OPEN to

delete the current pattern tour.