COP-USA CD59NV-IR35YK - Manual (Page 30)

29
IDLE
IDLE setting means if there is no command for the dome for a
period of time, the dome will run the actions as defined.
1) TIME: Move the cursor to “TIME” and press IRIS OPEN to
enter, and move the joystick up and dome to select among 30
sec, 1 min, 5 min, 10 min and 30 min. And press IRIS OPEN to
confirm.
2) ACTION: Move the cursor to “ACTION” and press IRIS OPEN to
enter. Move the joystick to select the actions including”
NONE, PRESET, SCAN, SEQUENCE, PATTERN. Press IRIS OPEN
to confirm.