COP-USA CD59NV-IR35YK - Manual (Page 28)

27
DISPLAY SETUP
Display setup allows the user to define the way to display the
dome titles on the monitor.
The displayed titles are listed as follows:
DOME TITLE
Indicate dome
PRESET Indicate the dwell time for preset title
MOTION Indicate the dwell time for auto function titles
(auto scan/auto cruise/pattern tour)
ZONES Indicate the dwell time for zone titles
DATE/TIME
Display the current date and time
PAN/TILT Time to display PTZ info and zoom info
ALARM Time to display alarm in/out info
IR LED INFO Time to display IR LED info
PROMPT
Display prompt info
Two options for the Dome Title and Date/Time: OFF and ON
Other setup selections include:
OFF
Title will not be displayed when activated.
ON Title will be continuously displayed when activated.
2 SEC Title will be displayed for 2 seconds after activation.
5 SEC Title will be displayed for 5 seconds after activation.
10 SEC Title will be displayed for 5 seconds after activation.
Move the cursor by joystick to the one you need to set, and press
Iris Open to enter the item. Move the joystick select the status
and press Iris Open to confirm.
Titles can be placed anywhere on the monitor. This feature allows
you to customize the window of your monitor screen. To set a
title position:
1. Use the joystick to position the cursor in the DISPLAY POSITION
2. Press Iris Open.
3. Use the joystick to move the title up, down, left, or right.
4. Press Iris Open.
5. Repeat steps 1 through 4 to position other titles
6. Position the cursor at BACK or EXIT. Press Iris Open to save
settings and exit menu.