Zones – COP-USA CD59NV-IR35YK User Manual
Page 50
49
ZONES
The use can set up zone title when the camera moves to a
defined location, which will make it much easier for the user to
identify the location. The dome supports 8 zone titles. Please
check the following steps to set up a zone
1) ZONE NO.: Move the cursor here and press IRIS OPEN to
enter the setup of Zone Number. Move the joystick to
select a zone number (1‐8) and press IRIS OPEN to confirm.
2) TITLE: Move the cursor here and press IRIS OPEN to enter
the setup of Zone Title. Check the detailed above in DOME
TITLE settings.
3)
to enter. Move the dome to a defined position as left limit
and press IRIS OPEN to save this left boundary.
4)
to enter. Move the dome to a defined position as right limit
and press IRIS OPEN to save this right boundary.
5) DELETE: Move the cursor here and press IRIS OPEN to
delete the current zone.