COP-USA CD55NV-IR35YK - Manual (Page 5)

IR Speed Dome Operating Manual
4
• Dome Address Setup
The dome supports up to 256 addresses and the dome will only response to the instructions given
to its own address. Please check the dip switch on the bottom of the dome for address setup.
• Manual Object Tracking
The use can move the joystick up, down, left or right to track the appearing object in the screen
and use the joystick to zoom in and out with auto focus.
• Privacy Mask Protection
Set black mask areas to protect the privacy zones. The black privacy locations can be set, and
support up to 8 mask zones.
• Timing Running Function
Users can set speed dome operation task at total 8 timing areas during 7 days.
• Coordinates and Directions Display
User can define the dome’s direction of due north, which will help to show up the exact moving
directions on screen. And zone title is supported to display when the dome moves to the specified
zone.
• Auto Tracking
The dome will automatically fix and track the moving object according to the user’s setup via OSD.
• Motion Detection
The dome will detect the changes in the defined video zone and trigger alarm.
It supports to 8 video Locations, each with 4 detection zones.
• PTZ and Lens Control
1) Zoom Control
Users can control zoom by keyboard to get near or far images.
2) Focus Control
The default setting is auto focus. The camera will auto focus based on the center of the video
display to get the clear image. In some special occasions, the user could do the manual focus to get the
desired image effect.
3) Auto Iris Control
Auto Iris is aiming to detect the environmental lights condition and adjust the iris to get the
stabilized brightness of the image.
4) Auto Back Light Compensation
In the highly bright background, auto back light compensation is aiming to compensate the
brightness of the dark object and adjust the background brightness to get a clear image.