COP-USA CD55NV-IR35YK User Manual
Page 10
IR Speed Dome Operating Manual
9
Wall-mount Installation Procedures
:
1) Take out the wall-mount bracket from the package , mark the installation hole
positions on the wall referencing to the dimension as picture 02.
2) Drill the hole and install 4 pieces of M8 expansion bolt into the hole.
(
Picture 05
)
3) Take out the IR speed dome and put the cables through the bracket.
Use M5 screws to fix the bracket and dome body, as picture 01
4) Use 4 pieces of M8 screw nuts with washer to fix the bracket on the wall.
Pendant-mount Installation Procedures
:
1) Take out the pendant-mount bracket from the package , mark the installation
hole positions on the ceiling referencing to the dimension in picture 04.
2) Drill the hole and install 4 pieces of M8 expansion bolt into the hole, as
picture05
3) Take out the IR speed dome and put the cables through the sockets on the
bottom of the pendant bracket. Use M5 screws to fix the bracket and dome body,
as picture 03