COP-USA CD55NV-IR35YK - Manual (Page 43)

IR Speed Dome Operating Manual
42
•ZONES
The use can set up zone title when the camera moves to a
defined location, which will make it much easier for the user to
identify the location. The dome supports 8 zone titles. Please
check the following steps to set up a zone
1) ZONE NO.: Move the cursor here and press IRIS OPEN to enter the
setup of Zone Number. Move the joystick to select a zone number
(1-8) and press IRIS OPEN to confirm.
2) TITLE: Move the cursor here and press IRIS OPEN to enter the
setup of Zone Title. Check the detailed above in DOME TITLE
settings.
3) : Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as left limit and press
IRIS OPEN to save this left boundary.
4) : Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as right limit and press
IRIS OPEN to save this right boundary.
5) DELETE: Move the cursor here and press IRIS OPEN to delete the
current zone.
MOTION
BACK EXIT
ZONES
--ZONE IS NOT SET--
ZONE NO. :1
TITLE :ZONE 1
DELETE
BACK EXIT
MAIN MENU
LANGUAGE :ENGLISH
RESTART
FACTORY DEFAULTS
HELP
EXIT