Ir speed dome operating manual, Timing action – COP-USA CD55NV-IR35YK User Manual

Page 44

IR Speed Dome Operating Manual

•TIMING ACTION

TIMING ACTION allows the user to set up the actions of the

dome in 7 days (each day with 8 timing segments). When
fishing the setup, the dome will do the actions according to
the setup motion during the defined time segment.

NO.:

Here shows the day within a week. Move the cursor here and press

IRIS OPEN to enter. Move joystick up or down to select the Serial No. (1-8)
for the timing action. Press IRIS OPEN to confirm.

START:

To set up the start time for the defined motion within this time

segment. Press IRIS OPEN to confirm.

STOP:

To set up the stop time for the defined motion within this time

segment. Press IRIS OPEN to confirm.

MOTION:

To setup the motion that will be operated in this time

segment. The motion includes: NONE. PRESET 1-8, SCAN 1-4, SEQUENCE
1-4 and PATTERN 1-4.

ON/OFF:

Move the cursor here and press IRIS OPEN to enter to enable

or disable this function. Press IRIS OPEN to confirm.

COPY:

The user could set up each 8 segment of 7 days separately or can

copy the finished setting for one day to the current day. Move the cursor
there and press IRIS OPEN to copy the settings.

BACK:

Press IRIS OPEN to save and be back to last menu.

NOTE:

It is not allowed to set up the same time segment during one day.

And the time segment can not exceed 00:00. During the timing action
segment, the defined action will be stopped if the user moves the dome.
If there is operation during the defined time segment, the action will
re-activated as long as it is in the defined timing action segment.

MAIN MENU

LANGUAGE :ENGLISH

RESTART
FACTORY DEFAULTS

HELP
EXIT

MOTION

BACK

EXIT

TIMING ACTION

NO. START STOP MITION