COP-USA CD55NV-IR35YK - Manual (Page 41)

IR Speed Dome Operating Manual
40
•AUTO CRUISE(SEQUENCE)
The dome supports 8 groups of auto cruise and each
cruise supports 32 presets. . Please check the following
steps to set up cruise.
1) SEQ NO.: Move the cursor here and press IRIS OPEN to enter
the setup of Sequence Number. Move the joystick to select a
preset number (1-8) and press IRIS OPEN to confirm.
2) TITLE: Move the cursor here and press IRIS OPEN to enter the
setup of Sequence Title. Check the detailed above in DOME TITLE
Settings.
3) : Move the cursor here and press IRIS OPEN
to enter. Move the cursor to EDIT and press IRIS OPEN enter
edit mode of sequence. Move the joystick left and right to
select each item.
a) When the < > is on the item NO., move joystick up or down
to select the Serial NO. of the preset in a sequence. There
are up to 32 presets in each sequence.
b) When the < > is on the item PRESET, move the joystick up or
down to select the preset NO. that the user wants to add in
the sequence.
c) When the < > is on the INTERVAL, move the joystick up or
down to select the interval time between each preset.
d) When the < > is on the last item, move the joystick up or
down to select edition mode as “INS (insert)”, “ok” and
“delete”.
Press IRIS OPEN when selecting INS to insert the settings into
the position of current Serial No.
Press IRIS OPEN when selecting OK to override the settings of
Current Serial No.
Press IRIS OPEN when selecting delete to delete the settings
of the Current Serial No.
Press IRIS OPEN to save all the setting and press IRIS CLOSE
to exit.
4) DELETE/START: Move the cursor here and press IRIS OPEN to
delete/start the current sequence.
MAIN MENU
LANGUAGE :ENGLISH
RESTART
FACTORY DEFAULTS
HELP
EXIT
MOTION
BACK EXIT
SEQUENCE
SEQ NO. :1
TITLE :SEQ 1
START
DELETE
BACK EXIT
SEQUENCE
NO. PESET INTERVAL
>> 01 002 03
02 001 03
03 - - - - -
04 - - - - -
05 - - - - -
06 - - - - -
EDIT 01 003 03 INS
BACK EXIT