COP-USA CD55NV-IR35YK - Manual (Page 46)

IR Speed Dome Operating Manual
45
•AUTO TRACKING
Under the auto tracking mode, the dome will auto track
the moving objects entering the scene. When the object is
moving out of the scene, the dome will return to a preset
position as defined after the defined time.
SENSITIVITY: The user can set up the auto tracking sensitivity under
this menu. When set as LOW, the dome will do auto tracking when obvious
object entering the screen. When set as HIGH, the dome will do auto
tracking when small object moving into the screen. Move the cursor there
and press the IRIS OPEN to enter. The options include: LOW, MID and HIGH.
TARGET: To set up the size of the tracking object. The options include
Large. MID and SMALL.
AUX: If set “ON” here, the object auto tracking will activate alarm aux
output at the same time. Press IRIS OPEN to enter to select “ON” or “OFF”
ZOOM MATCH: Under the auto tracking model, if turn on the function of
ZOOM MATCH, the dome will do zooming in and out during auto tracking
to keep the right proportion between the object and background. Move
the cursor there and press the IRIS OPEN to enter. And move the joystick to
select the optical zoom.
ENABLE: Move the cursor here and press IRIS OPEN to enter to select
“ON” or “OFF” to enable or disable this function.
MOTION
BACK EXIT
AUTO TRACKING
SENSITIVITY :MID
TARGET :MID
ZOOM MATCH :OFF
AUX :OFF
ENABLE :OFF
BACK EXIT
TRACKING SCENE SET
DELETE
RETURN DELAY :10SEC
BACK EXIT
MAIN MENU
LANGUAGE:ENGLISH
RESTART
FACTORY DEFAULTS
HELP
EXIT