Ir speed dome operating manual, Auto scan, Scan no – COP-USA CD55NV-IR35YK User Manual
Page 40
IR Speed Dome Operating Manual
39
•AUTO SCAN
The dome supports 8 groups of auto scan. Please check
the following steps to set up a scan.
1)
SCAN NO.:
Move the cursor here and press IRIS OPEN to enter the
setup of SCAN Number. Move the joystick to select a preset number
(1-8) and press IRIS OPEN to confirm.
2)
TITLE:
Move the cursor here and press IRIS OPEN to enter the
setup of SCAN Title. Check the detailed above in DOME TITLE
settings.
3)
Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as left limit and press
IRIS OPEN to save this left boundary.
4)
<RIGHT LIMIT>:
Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as right limit and press
IRIS OPEN to save this right boundary.
5)
START:
Move the cursor here and press IRIS OPEN to start the
current scan.
6)
SCAN SPEED:
Move the cursor here and press IRIS OPEN to set up
the scan speed ranging 1-30.
MAIN MENU
LANGUAGE :ENGLISH
RESTART
FACTORY DEFUALTS
HELP
EXIT
MOTION
BACK
EXIT
SCAN
SCAN NO. :1
TITLE :SCAN 1
START
SCAN SPEED :20
BACK
EXIT