COP-USA CD55NV-IR35YK - Manual (Page 19)

IR Speed Dome Operating Manual
18
•DISPLAY
Display setup allows the user to define the way to display
the dome titles on the monitor.
The displayed titles are listed as follows:
Two options for the Dome Title and Date/Time: OFF and ON
Other setup selections include:
Move the cursor by joystick to the one you need to set, and press Iris
Open to enter the item. Move the joystick select the status and press Iris
Open to confirm.
Titles can be placed anywhere on the monitor. This
feature allows you to customize the window of your monitor
screen. To set a title position:
1) Use the joystick to position the cursor in the DISPLAY POSITION
2) Press Iris Open.
3) Use the joystick to move the title up, down, left, or right.
4) Press Iris Open.
5) Repeat steps 1 through 4 to position other titles
6) Position the cursor at BACK or EXIT. Press Iris Open to save settings
and exit menu.
•IR LED
The user can open and close the IR LED manually and set
up the IR LED work mode under this OSD mean. (Under normal
operation mode, the user can press IRIS OPEN and IRIS CLOSE
to adjust the IR LED power):
1) CONTROL MODE :
DOME TITLE Indicate dome
PRESET Indicate the dwell time for preset title
AUTO FUCTION Indicate the dwell time for auto function titles
ZONES Indicate the dwell time for zone titles
DATE/TIME Display the current date and time
OFF Title will not be displayed when activated
ON Title will be continuously displayed when activated
2 SEC Title will be displayed for 2seconds after activation
5 SEC Title will be displayed for 5seconds after activation
10 SEC Title will be displayed for 5seconds after activation
DISPLAY
ALARM :5 SEC
IR LED INFO :5 SEC
PROMPT :ON
BACK EXIT
DISPLAY POSITION
BACK EXIT
DISPLAY
DOME TITLE :OFF
PRSEST :5 SEC
MOTION :5SEC
DATE/TIME :ON
PAN/TILT :5 SEC
BACK EXIT
MAIN MENU
LANGUAGE :ENGLISH
RESTART
FACTORY DEFAULTS
HELP
EXIT