COP-USA CD55NV-IR35YK - Manual (Page 14)

IR Speed Dome Operating Manual
13
Yellow: RS485B
Operation Instructions
 Main Functions Fast Call Up
Our IR Speed dome supports 220 preset positions. You can activate some special functions by
calling upon code number 65-99.
Serial
No.
Command Fast Call Up Note
1 Start Auto Scan Call 99
Default to start auto scan of
group No.1
2 Start Auto Cruise Call 98
Default to start auto cruise of
group No.1
3 Start Pattern Tour Call 97
Default to start pattern tour of
group No.1
4
Start Auto Scan of
Group No.
Call 80+ Call pp+ Call 99
pp means：Group No.1-8
5
Start Auto Cruise of
Group No.
Call 80+ Call pp+ Call 98
6
Start Pattern Tour of
Group No.
Call 80+ Call pp+ Call 97 pp means：Group No.1-4
7
Stop Auto Mode/End up
Setting
Call 96
8 Open OSD Menu Set 95（or Call 95）
9 Remote Reset Call 94
10 Recover Factory Default Call 82
•System Self-Testing
The dome will do self-testing after power up, and system status will show “Normal” if system Is
running normally. If error happens, testing result will be shown in “○” or “X”. “○” means normal and
“X” means error. Please check the according meaning as follows:
Serial
No.
1 2 3 4 5 6
Meaning Dip Switch Temperature Sensor Storage Pan Tilt Camera