COP-USA CD55HD-IP - Manual (Page 29)

Page 23 IP CAMERA USER MUANUAL
Fig 5-18 Mail Setting
1. From Email: sender‟s e-mail address
2. User name and password: sender‟s user name and password
3. Server address: SMTP name of sender
4.Select the secure connection type at the Secure Connection pull down list according to
user‟ actual needs
5. Receival email address list: add email address into the list
6. Receival email address: receiver‟s e-mail address
7. After all parameters setup, user can click “Test your account settings”. If email sent
successful, a “Test Successful” window will pop up, if not, users can try other email
addresses or check the setting.
Notice: If user change the static IP into PPPoE and select mailbox, there will be an
e-mail sent to users‟ mail box for notify a new IP address.
5.4.10 FTP
Enter into Network ConfigurationFTP interface; please refer to Fig 5-19:
Fig 5-19 FTP Setting
1. Add: Click Add button to input FTP server‟s server name, address, port number, user
name, password, and upload path, click OK to confirm the setting. Refer to Fig 5-20:
2. Modify：User can click this button to change some information of the FTP server
3. Delete：Select certain FTP account; Click this button to delete this account
4. Test ：Select certain FTP account; Click this button to test its valid or not.
Please refer to the following table for parameters and instructions of FTP configuration.