COP-USA CD55HD-IP - Manual (Page 11)

Page 5 IP CAMERA USER MUANUAL
For example, the network segment of this computer is 192.168.13.x under the local
config table. So, please modify the IP address, Gateway of IP-Cam which must be in the
same network segment with the computer. Modifying the network, you have to input the
password and click “OK” button to save the setting.
Note: The default user name is: admin. The default password is: 123456.
The new IP address of this device will display after modification.
Step 3: Use the IP-Tool to login the IP-Cam.
Right-click the IP address and select “browse with IE” or double click the device
information. This will let the IE browser to connect IP-Cam as shown below. IE browser
will auto download the Active X control. If the IE browser cannot download the Active
X control, please refer to Q4 of Chapter 8. A login window will pop up after the
installation of the Active X control.
Input user name and password and then click “OK” button to login.
Note: You can also use the modified IP address of the IP-Cam. Input the IP address in
the IE browser bar and then click “Enter” to access IP-Cam. The default user name is
admin. The default password is 123456.
3.1.2 Directly Access through IE
The network service is default as shown below: