6 ddns configuration – COP-USA CD55HD-IP User Manual
Page 25

Page 19
IP CAMERA USER MUANUAL
Fig 5-14 IP Notify Config
5.4.6 DDNS Configuration
1. Enter into "Network Configuration""DDNS Configuration"
tab as shown in Fig
5-15:
Fig 5-15 DDNS Config
Note: The steps to band a domain name for video surveillance server are as follows.
Firstly, register a user name and a password to log on the website of service supplier,
and then apply for a domain name online for the server. After that, users can visit the
server through inputting the domain name at IE terminal.
2. Press the "Save" button to save the settings.
Please refer to the following table for parameters and instructions of DDNS
configuration.
Parameter
Meaning
DDNS server
Address of the website which provided by domain name supplier. The
optional
User name
Log in the website of domain name supplier
Password
Log in the website of domain name supplier
1. Apply the Domain Name (Take dns2p for example)
(1)
Register in the Web
Step 1: Fill in the blank of IE address with „www.dns2p.com‟.
Step 2: Click
to enter the website.
Step 3: Click "New User" in the right of homepage to register. For example: User ID is
„abc‟, and password is „123456‟. The register dialog display as below: