Checkline TT05 - Manual (Page 24)

Series TT05 Digital Torque Testers User’s Guide
23
14 SPECIFICATIONS
14.1 General
Accuracy: ±0.3% of full scale
Sampling rate: 7,000 Hz
Power: AC or rechargeable battery. Low battery indicator appears when battery level is low, and tester
powers off automatically when power reaches critical stage.
Battery life: Backlight on: up to 7 hours of continuous use / Backlight off: up to 24 hours of continuous use
Measurement units: ozFin, lbFin, lbFft, Nm, Ncm
Outputs:
USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VCD, ±0.25% of full scale at capacity.
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Safe overload: 150% of full scale (display shows “OVER” at 110% and above)
Weight: 10.9 lb [4.9 kg]
Environmental requirements: 40 - 100°F, max. 96% humidity, non-condensating
Warranty: 3 years (see individual statement for further details)
14.2 Dimensions IN [MM]
14.3 Capacity x Resolution
Model No. lbFin ozFin lbFft Ncm Nm
MTT05-12 12 x 0.005 192 x 0.1 1 x 0.0005 135 x 0.1 1.35 x 0.001
MTT05-25 25 x 0.01 400 x 0.2 2 x 0.001 290 x 0.2 2.9 x 0.002
MTT05-50 50 x 0.02 800 x 0.5 4 x 0.002 570 x 0.5 5.7 x 0.005
MTT05-100 100 x 0.05 1600 x 1 8 x 0.005 1150 x 0.5 11.5 x 0.005