Checkline TT05 - Manual (Page 15)

Series TT05 Digital Torque Testers User’s Guide
14
11.3 Auto Output Settings
Select the output type. One or both output types may be enabled. The display will appear as follows:
Note: The same auto save/output/zero functions are available in First / Second Peak mode. Refer to the
First / Second Peak section for details.
12 FIRST / SECOND PEAK
This function captures two consecutive peaks which can occur over the course of a test, such as with
tamper-evident breakaway band closures, torque tools, and other samples.
12.1 Configuration
Several functions can be triggered automatically upon second peak capture:
1. Transmit the first peak value
2. Transmit the second peak value
3. Save the first peak value to memory
4. Save the second peak value to memory
5. Zero the primary and peak values
These automatic functions can help automate and expedite testing processes. If beeps are enabled, an
audible tone will sound when the output, storage, and zero functions have occurred. In order for First /
Second Peak detection to be active, the appropriate operating mode must be selected. See the
Operating Modes section for details. The display will appear as follows:
Any combination of the above functions may be selected.
Function Description
Enabled If enabled, 2PK will appear as one of the operating modes. In the main display,
the Peak values will reference the first and second peaks – first peak on top,
second peak below. Refer to the Home Screen & Control section for details.
Peak Settings Press ENTER to access. See Section 12.2 for details.
Auto Output Press ENTER to access. See Section 12.3 for details.
Auto Store PK1 Automatically stores the first peak value to memory.
Auto Store PK2 Automatically stores the second peak value to memory.
Auto Zero Automatically zeroes the display following data transmission and/or storage.
FIRST/SECOND PEAK
* Enabled
+ Peak Settings
+ Auto Output
* Auto Store PK1
Auto Store PK2
* Auto Zero
AUTO OUTPUT
SETTINGS
RS232/USB Output
Mitutoyo Output