Checkline TT05 - Manual (Page 2)

Series TT05 Digital Torque Testers User’s Guide
1
Thank you…
Thank you for purchasing a Mark-10 Series TT05 digital
torque tester, designed to measure bottle cap application
and removal torque.
With proper usage, we are confident that you will get
many years of great service with this product. Mark-10
instruments are ruggedly built for both laboratory and
industrial environments.
This User’s Guide provides setup, safety, and operation
instructions. Dimensions and specifications are also
provided. For additional information or answers to your
questions, please do not hesitate to contact us. Our
technical support and engineering teams are eager to
assist you.
Before use, each person who is to use a Series TT05 digital torque tester should be fully trained in
appropriate operation and safety procedures.
TABLE OF CONTENTS
OVERVIEW .........................................................2
POWER ...............................................................3
SETUP ................................................................4
HOME SCREEN AND CONTROLS ...................4
OPERATING MODES .........................................6
CHANGING THE UNITS .....................................6
DIGITAL FILTERS ..............................................6
SET POINTS .......................................................7
DATA MEMORY AND STATISTICS ..................8
COMMUNICATIONS AND OUTPUTS .............10
BREAK DETECTION ........................................13
FIRST / SECOND PEAK ..................................14
CALIBRATION .................................................16
PASSWORDS ...................................................19
OTHER SETTINGS ...........................................21
SPECIFICATIONS ............................................23