Checkline HP-Textile-Durometer - Manual

-1-
T ABLE OF C ONTENTS
1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1 Unpacking
1.2 Complete
Kit
2.0 Operating Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Memory Pointer (optional)
3.0 Verifying Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1 Textile Durometers
3.2 Shore Durometers
4.0 Available Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.0 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pressure on the spring-loaded outer ring which exceeds the
range of the instrument by more than 100% may cause permanent
damage to the measuring spring and must be avoided under any
circumstances.
This device must not be operated in explosion hazard areas and
must not come into contact with aggressive substances.
WARNING
-8-
Model: HPSO
Indentation Body: U-grooved 3/32"
Depth of Indentation: 0 - 2.5 mm
Test pressure*: approx. 12.5 N
Meas. spring force: 0.55 - 8.065 N
Display range: 0 –100 Shore hardness graduation marks
Scale diameter: 54 mm
Working face: 18 mm
Weight approx. 300 g net/ 500 g gross
Dimensions: 50 (L) x 50 (W) x 110mm (L)
*Pressure on test material surface when outer ring is in measuring position.