Checkline MT2013 - Manual

NOTE: This Calibrator is suitable to confirm the accuracy of tachometers only. A separate test unit is
required to verify that Tachometers will work at a specified distance from a target
WARNING This equipment is class I and must be earthed.
Output Din Connector (front view)
Pin 1 LED Drive (-ve)
Pin 2 Pulse Out ( 0 -– 2.5v)
Pin 3 5v in from "CT" (drives internal LED if present)
Pin 4 LED Drive (+ve)
Pin 5 Ov from "CT" (drives internal LED if present)
©
Compact Instruments Ltd November 1998
www.compactinstruments.co.uk
email: [email protected]
Document No: 13713 iss 2
Operating Instruction
Model MT2013
Tachometer Calibrator
Phone: (0044) 0 1204-532544
Fax : (0044) 0 1204-522285