Keyboard type – 360 Systems DigiCart/II Plus User Manual

Page 47

DigiCart/II Plus Owner's Manual

Operating Instructions

• 35

Keyboard Type

Selects between the convenient DigiCart/II Plus MINI keyboards and conventional PC-AT keyboards.
Either type may be attached to the KEYBOARD connector on the back panel.

The SETUP MENU provides a choice between the standard 101-key PC-AT style keyboard, a
small footprint mini-keyboard (Model RC-205), and an infrared-linked mini-keyboard available
from 360 Systems. Contact your 360 Systems Dealer for details on these accessories.

To choose between keyboard types:

1. Press the SETUP MENU button and use the selection controls to choose and

confirm your selection:

KEYBOARD TYPE

MINI

KEYBOARD TYPE

STANDARD

The selection will be stored in non-volatile memory so that if DigiCart/II Plus is turned off, the
correct keyboard will be selected on power-up.

NOTE: The keyboard must be connected at the time of power-up, or DigiCart/II Plus will not
recognize it. If connected after power is on, press SEC + DNET XFER to re-initialize (soft re-
boot) the system.

EYBOARD

APPING

SSIGNMENTS

The chart below shows mapping of keys to DigiCart/II Plus functions. Function keys F1 through
F12 and arrow keys have been "mapped" to front panel buttons and select knob for remote control
of all DigiCart/II Plus functions.

KEY MINI

KEYBOARD

FUNCTIONS

STANDARD KEYBOARD

FUNCTIONS

UTILITY MENU

SETUP MENU

EDIT MENU

VIEW LIST

F5 PAUSE PAUSE

F6 PAUSE LOOP

F7 LOOP SECONDARY

F8 RECORD

DNET

XFER

F9 STOP FIND

F10 PLAY

RECORD

(FN) F11

SECONDARY

STOP

(FN) F12

DNET XFER

PLAY