360 Systems DigiCart/II Plus - Manual (Page 45)

DigiCart/II Plus Owner's Manual Operating Instructions • 33
Overwrite
Permits existing cuts to be directly overwritten in RECORD.
1. Press the SETUP MENU button and use the selection controls to choose and
confirm your selection:
OVERWRITE
OFF
OR
OVERWRITE
ON
When OVERWRITE is ON, after pressing REC, the display will show:
X.XXXX CUT NAME
PUSH PLAY TO REPLACE
Press PLAY to record to the ID number on the top line.
If you elect to NOT OVERWRITE the targeted cut, use the SELECT control to choose an empty
ID in the same Directory, locking out all existing cuts, or press STOP to cancel recording.
Recording Time Limit
Enhances the management of available Disk space of DigiCart/II Plus and accelerates entry to the
Record Ready condition when set to smaller values. Furthermore, you can start a recording and
walk away knowing that after the specified time limit (setting +5%), the unit will stop recording.
1. Press the SETUP MENU button and use the selection controls to choose and
confirm your selection:
RECORDING
TIME LIMIT: NONE
OR
Use standard steps to select: 30 SEC, 1 MIN, 5 MIN, 30 MIN or 60 MIN.
Restart Mode
While one cut or stack is playing, you can choose other selections for playback. Restart Mode
determines whether DigiCart/II Plus will discontinue playback of the current cut and begin
playback of the next selected cut immediately when PLAY is pressed, or wait to begin playback
when the current selection is completed.