360 Systems DigiCart/II Plus - Manual (Page 43)

DigiCart/II Plus Owner's Manual Operating Instructions • 31
SAMPLE RATE & FORMAT
44100 STEREO
OR
SAMPLE RATE & FORMAT
44100 MONO
OR
SAMPLE RATE & FORMAT
32000 STEREO
OR
SAMPLE RATE & FORMAT
32000 MONO
2. Use the Left and Right Position buttons to select the desired Rate. Press the
ENTER button to confirm your selection or CANCEL to exit and restore the
original value.
Input Monitor
Allows you to monitor audio that has been processed through the digital audio circuitry.
Throughput is always in Stereo regardless of recording format selected.
Press the SETUP MENU button and use the selection controls to choose and confirm your
selection:
INPUT MONITOR
OFF
OR
INPUT MONITOR
ON
NOTE: DigiCart/II Plus automatically provides "pass through" A/D - D/A audio when the REC button
is pressed. Therefore, most operations may be accomplished with the INPUT MONITOR: OFF.
Threshold
DigiCart/II Plus provides the option of recording "on audio". Upon engaging RECORD and
pressing PLAY, DigiCart/II Plus will wait to trigger on incoming audio at or above a pre-selected
threshold. Use standard steps to select between the default value of -42, another of the 11 threshold