Condensed operating guide, Navigation, Recording and playing cuts – 360 Systems DigiCart/II Plus User Manual
Page 19

DigiCart/II Plus Owner's Manual
Getting Started
• 7
Condensed Operating Guide
This section presents condensed information on the operation of your DigiCart/II Plus. Fully
detailed step-by-step instructions are found in Chapter Three: OPERATING INSTRUCTIONS.
Navigation
Selecting A Drive
Press the Left POSITION button twice.
Rotate the SELECT control to choose a drive number.
Selecting A Directory
Press the Right POSITION button from drive level.
Press the Left POSITION button from the cut level.
Rotate the SELECT control choose a directory ID.
Selecting A Cut
Press the Right POSITION button twice.
Rotate the SELECT control to choose an ID/Name.
Recording And Playing Cuts
Setting Record Levels
Using tone, press REC. Adjust INPUT LEVEL for -9 segments "just off". Illumination of the red
"0" segments indicates probable distortion.
Recording
Press the REC button. Press the PLAY button to start recording.
Press the PAUSE button to interrupt recording,
Press the PAUSE button again to continue.