Physical dimensions, Audio specifications – 360 Systems DigiCart/II Plus User Manual
Page 105
![background image](/manuals/655400/105/background.png)
DigiCart/II Plus Owner's Manual
Appendix C - Technical Specifications
• 93
Physical Dimensions
Height
5.19" (130mm) (Standard EIA 1/2-Rack, 3U High)
Width 8.50"
(213mm)
Depth 17.13"
(428mm)
Net Weight
18.25 Lbs (8.3 Kg)
Shipping Weight
25 Lbs
Audio Specifications
Bandwidth
10Hz - 20kHz ±0.5 dB; optionally 15kHz @ Fs = 32,000
Quantization 16
bit
linear
Sampling Frequencies
48K; 44.1K; 32K; Stereo or Mono
Dynamic Range
>92 dB
Signal-to-Noise >90
dB
Distortion (THD+N)
<0.005% ref. to full scale
Interchannel Phase Deviation
<0.1 degree at 15kHz
Interchannel Crosstalk
>90 dB at any frequency
Input Circuit
Electronically balanced with RF suppression; Input Z = 40k
ohms each leg; XLR-3 type connectors
Nominal Operating Level
+4dBu Output = 18dBFS Digital
Common Mode Rejection
Better than 60 dB @ 120 Hz
Maximum Input Level
+21 dBu single ended, +27 dBu differential
Output Circuit
Phase corrected differential outputs; short circuit proof & RF
protected. Output Z = 100 ohms
Maximum Output Level
+16 dBu single ended, +22 dBu differential
Digital Inputs
AES/EBU*, XLR-3 type Conn., 110
Ω; BNC Conn.,
75
Ω;IEC958 Type II, unbal., BNC connector w/RCA adapter
Digital Outputs
AES/EBU*, XLR-3 type Conn., 110
Ω; BNC Conn., 75Ω;
IEC958 Type II, unbal., BNC connector w/RCA adapter
Data Reduction
Selectable Dolby AC-2, at 48K stereo only
*AES3-1992 / EBU Tech 3250-E (1985)
NOTE: All audio measurements made at 48K-sample rate, stereo, with linear coding.
Measurement bandwidth: 10 Hz to 20 kHz. Analyzer used: Audio Precision System One.