360 Systems DigiCart/E - Manual (Page 64)

54 • • • • Playlists
Playlist Edits
By now you are familiar with the routine uses of EDIT MENU for cuts. For Playlists, EDIT MENU takes
you through another doorway (Scan Mode) to a different editing environment. The Playlist Edit Menu
provides six options:
• INSERT
• APPEND
• REMOVE
• TRUNCATE
• CHANGE PLAYLIST TYPE
• SCAN
S CAN M ODE
SCAN is the mode that lets you review the contents of a Playlist. Use the selection knob or navigation
arrows to scan through the Playlist. Playlist Edit operations begin from, and return to, the Scan mode.
While in the Playlist Edit menu, select SCAN and press the ENTER button to return to the Scan Mode
without performing any of the edit operations.
Select the Playlist to be edited, then press EDIT . DigiCart/E enters the Scan mode.
The top line displays the Playlist event number, ID and name. Event duration, sampling rate and
record format are shown on the lower command line. If the event is a Playlist, the second line displays
the name of the first cut in that Playlist.
To review the contents of the Playlist, rotate the selection knob to scan the list.
At any time, you may press the PLAY button. The Playlist will play, beginning with the event selected.
Linear Playlists will play to the end. Rotating Playlists will play only the selected item, then cue to the
next item.
To edit the list, press ENTER . Then use the selection knob to choose the edit function you need, such
as Insert, Append, or Truncate. Press ENTER again to begin using that function. See the following
descriptions for further information.
I NSERT
Adds a cut or Playlist immediately before the current selection highlighted in Scan mode.
Select the Playlist to be edited, then press EDIT . Scan the Playlist for the point you wish to make an
insertion. Highlight the file after the point you want to insert the new event.
Select INSERT from the Edit Tools list. Use the selection knob or navigation arrows to locate the file
you wish to insert, then press ENTER to insert it. DigiCart/E will complete the operation and return to
Scan mode.
Press the ENTER button to continue editing. EDIT or EXIT will exit the Playlist Edit menu. You will
be prompted to save upon exiting, press ENTER to save, or EXIT to discard all edits. DigiCart/E
returns you to the Playlist Directory.