360 Systems DigiCart/E - Manual (Page 42)

32 • • • • Setup and Utility Menus
Assigning a Hot Key on the DigiCart/E Front Panel
Select the cut or Playlist to be assigned.
Select UTILITY | Assign Hot Key. The display will prompt to select a key.
Press BANK SELECT to choose the preferred Hot Key bank. The Bank Select button will illuminate
when Bank B is currently selected. Then press the HOT KEY button (1-4) to be assigned.
Note: Assignments made to these buttons will also automatically be assigned to equivalent keys on RC-
series remote controls or an attached keyboard. Ref. Hot Key Mapping, above.
The selected item is now assigned. Press the Hot Key to play it.
Continue making other Hot Key assignments, or exit the mode by pressing either ASSIGN HOT KEYS
or EXIT .
Assigning a Hot Key using an RC-320 Remote Control
Select the cut or Playlist to be assigned.
Select ASSIGN PRESETS button on the remote control. The display will prompt to select a key.
Press the HOT KEY button to be assigned (1-16) on the remote control.
Note: Assignments made to these buttons will also automatically be assigned to equivalent keys on
DigiCart/E or an attached keyboard. Ref. Hot Key Mapping, above.
The selected item is now assigned. Press the Hot Key to play it.
Continue making other Hot Key assignments, or exit the mode by pressing either ASSIGN PRESETS
or EXIT .
Assigning a Hot Key using a Keyboard
Select the cut or Playlist to be assigned.
The alphanumeric keyboard's Scroll Lock must be ON. Press F1 (Utility) on the keyboard, then use the
keyboard navigation arrows to select the Assign Hot Key menu item. The display will prompt to select
a key.
Press any alpha- or compound-alpha key (e.g. A, SHIFT+A, CTRL+A, ALT+A, etc.).
Note: Assignments made to these keys will also automatically be assigned to equivalent keys on RC-
series remote controls or DigiCart/E’s front panel, but compound-key assignments have no
equivalents on the other devices and are therefore not shown in the table. Ref. Hot Key Mapping,
above.
The selected item is now assigned. Press the Hot Key to play it.
Continue making other Hot Key assignments, or exit the mode by pressing either F1 or ESC .