360 Systems DigiCart/E - Manual (Page 55)

Recording • • • • 45
S ECONDARY C UES
The Secondary Cue signal controls an open collector output on the GPI/O connector. See Appendix A for
wiring diagrams.
Secondary cues are not recorded as audio tones and do not require disk space or an extra track. DigiCart/E
remembers when and how long you press and hold the
REC button while in Edit Mode and places that data
in the file’s information header. Each cut can store one cue activation.
When a cut is played in Edit mode, the RECORD light will illuminate for the duration of the Secondary
Cue activation. There is no Secondary Cue indication on the front panel when the cut is played outside of
Edit mode.
R ECORDING A S ECONDARY C UE
Select a cut to edit, then press the EDIT button .
Press STOP , then Press PLAY to play the file in Edit mode. During playback, press the REC button at the
location where you want the Secondary signal to actuate.
Release the REC button at the location where you want the Secondary signal to stop.
DigiCart/E will automatically overwrite old Secondary Cue marks.
D ELETING /E RASING A S ECONDARY C UE
Select the cut you want to edit, then press the EDIT button. When the cut is not playing (Stopped or idle),
press and hold the REC button and press the EXIT button to delete the cue.