360 Systems MAXX-2420EX - Manual (Page 89)

MAXX-2420-EX Owner’s Manual Page 89
Configuring NTP
The server GUI is used to set the time zone and to enter the networking parameters. The local
GUI must be used, as these configuration screens are not available on the Remote Workstation
Interface.
Selecting the Time Zone
Starting at the main menu bar, Click Edit >Configure >Date-Time screen. When “Automatic
Updates” is not checked, the Region and Zone lists are enabled. Select your region and then
the zone within that region. There may be more than one way to your zone; America/New
York, for example, is the same as US/Eastern. Click the APPLY button to activate the settings,
After changing the time zone a Quick Restart must be performed before changes become
effective.
Figure 36 - Date/Time Configuration Screen