360 Systems MAXX-2420EX - Manual (Page 56)

Page 56 MAXX-2420-EX Owner’s Manual
Setting the Date and Time
Click EDIT >CONFIGURE >DATE/TIME. The dialog below appears.
Figure 18 - Time/Date Configuration Screen
Select the REGION and ZONE according to your geographic location or time zone. Use the
scroll-bar as necessary, and then click on the desired value.
Set the TIME and DATE by clicking on the Time/Date field and navigating the clock and
calendar.
Check Automatic Updates to enable automatic updates using the Network Time Protocol
(NTP). Refer to Network Time Protocol on page 88.
Note: A System Restart is required for a Time Zone change to take effect