360 Systems MAXX-2420EX - Manual (Page 66)

Page 66 MAXX-2420-EX Owner’s Manual
Editing Playlists
Removing Clip from a Playlist
To remove a Clip from a Playlist:
• Make sure the clip to be removed is not PLAYING or CUED .
• Position the cursor over the Clip and right-click. Select REMOVE from the pulldown
menu.
Removing Clips Above or Below the Selected Clip
All clips above or below the selected clip can be removed unless a CUED or PLAYING clip is
affected. These options will “grey out” if removal is not allowed for this reason.
To Remove All clips above a selected clip:
• Move the cursor over the clip to select it.
• Right click the mouse and select
Remove All Above from the pulldown menu.
To Remove All clips below a selected clip:
• Move the cursor over the clip to select it.
• Right click the mouse and select
Remove All Below from the pulldown menu.
Inserting HOLD Into a Playlist
The HOLD command inserts a hold (wait) event in a Playlist immediately before the selected clip.
The PLAY or JUMP command will restart a Playlist after it has stopped on a HOLD line. The
HOLD
command is also available in the Playlist Item Context Menu, accessed by right-clicking in
the Playlist item window. If a programmed Start Time has been set and is armed, the Playlist
will resume when the Programmed Start Time occurs. See Page 63 for instructions on setting a
programmed start time.
Appending a Playlist (FILE >APPEND)
Make sure the EDIT checkbox is checked in the Playlist View window. Click FILE >APPEND
from the Playlist View to bring up the list of available Playlists. Double-click on a playlist to load
it. It will appear at the end of the list after a label event that shows the name of the appended list.
This operation can be performed during playback, allowing a new playlist to be loaded without
interruption of programming.