Panasonic RX-ES50 - Manual (Page 19)

One track recording (1 TRACK)
The unit will record only one track you selected, and stops
automatically.
J5G3
Preparation; Insert the CD.
Load the tape with the side to
be recorded facing up,
• Find the postition on the tape where the
recording is to start.
•The direction is automatically set to re­
cord on the side facing up display
lights).
•When recording from the start of side A
or B, have the leader tape wound up
before proceeding (see page 16).
REC^AUSE Press •/• 11.
CD play and recording starts at the same
time.
• Recording stops automatically after the
selected track is finished.
•Only part of a track may be recorded at
the end of the top side. This track will be
re-recorded in its entirety at the begin­
ning of the reverse side (when the re­
verse mode is set to
2 Press tt/CLEAR.
3 CD REC
MODE
|AUTOj^^
Press CD REC MODE to dis­
play “1-REC”.
AUTO-y1-REC-^OFF
t______________ 1
(The display changes each time the but­
ton is pressed.)
4 CD/rUNEmME Press ►►!/+ or W^/— to se­
lect desired track.
If you are going to record first track on the
CD, skip this step.
C d 5
n n I
U U I
To record another CD insuccession:
Press ^ of the disc lid and replace the CD, then follow steps 4 and 5.
To stop recording:
Press a.
CD play also stops at the same time.
19