Panasonic RX-ES50 - Manual (Page 16)

Recording and CD play starts at the same time automatically.
Normai and high position tapes can be used.
T A BEtyPAUSE
_l 6^ OOP
MEMORY
^^ TUNEFVCO
RANDOM ►H
CZ) CID CZ)
CD
REPEAT MffiLEAB ►/!!
sp о о
REvllOOE REW ИЕ1 FF
C D О О
TAPE
C-RESET ■ - 4 ^
О О О
PRESET EQ - VOLUME +
О OD
Load the tape with the side to
be recorded first facing up.
Find the position on the tape where the
recording is to start.
When recording from the start of side A
or B. have the leader tape wound up
before proceeding.
With the side to be
recorded facing up.
Insert the tape vvith exposed
tape facing you.
REC/PAUSE Press #/• 11.
Recording now starts.
After recording is over, both CD play and
recording on the deck stop automatically.
[^; Recording starts from the side fac­
ing up.
<3: Recording starts from the reverse
side.
Cd I
=j
Lights.
OC I
REV MODE
Select the mode with REV
MODE on the remote control.
:;;rDC^D: Sound is recorded on the
side facing up and then the
reverse side, and the tape
stops automatically.
Sound is recorded on only
one side of the tape, and
then the tape stops automati­
cally.
Reverse mode
Ld 15 Бс^'иЧ
Direction
Insert the CD and press
■/CLEAR.
To stop recording:
Press ■.
CD play also stops at the same time.
To stop recording temporarily;
Press •/• II.
To resume recording, press •/•II.
To wind up the leader tape;
Magnetic part of tapel
Leader tape (on which
nothing can be recorded)
16