Listening to tapes, Press, Press load the tape and close the lid – Panasonic RX-ES50 User Manual
Page 13: To stop play, To listen to another side of the tape, Tape press ◄ ► during playback, Cedi, Pe do
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Listening to Tapes
Press POWER.
(Only when the batteries are used for the power supply)
Press ■.
7RPE
Press load the tape and
close the lid.
The direction is automatically set to play
the top side (^ is displayed).
► Topside
Insert the tape with the
exposed tape facing you.
IRFE
DOO.
Tape travel direction
indicator
TAPE
Press ◄ ►.
Playback now starts.
1^: The side which is facing up Is
played back.
; The reverse side is played back.
Reverse mode
JR
n.
PE
DO
r
1
To stop play:
Press
To listen to another side of the tape:
TAPE
Press ◄ ► during playback.
When the batteries are used for the power supply, pressing POWER
on the remote control cannot turn the unit on.
CEDI
If a tape is loaded, pressing ◄ ► will automatically turn the unit on
and start playback (only when AC power is supplied).
Type of tape which can be played on this unit;
The unit automatically identifies the type of tape.
Normal position/TYPE I
0
High position/TYPE II
0
Metal position/TYPE IV
0
Lights.
13