beautypg.com

Sc-ch75, For australia and new zealand, Note – Panasonic SC-CH75 User Manual

Page 7: External unit connection, Optional antenna connections, Analog player, Fm outdoor antenna, Am outdoor antenna (not included)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

a -:. Í

-r ;

SC-CH75

For Australia and New Zealand

After you have connected all other cables:

Press MAIN POWER switch at the rear panel to
ON position.

The primary circuit is always “live” as long as this

switch is set to ON position.

Note:

If you do not plan to use the system for a long

time, press the MAIN POWER switch to OFF

position or disconnected the AC power supply
cord.

Caution
Use this speaker only with the recommended system.

Failure to do so may lead to damage to the amplifier
and/or the speaker, and may result in the risk of fire.

Consuit a qualified service person if damage has oc*
curred or if you experience a sudden change in perfor­

mance.

External unit connection

• For details, refer to the instruction manual of the units which are to

be connected.

•When units other than those described beiow are to be connected,

please consult with your audio dealer.

Analog player

Only an analog player with a built-in phono equalizer can be con­
nected.

This example shows how to connect the analog player with the

PHONO OUT/LINE OUT switch.

Set the switch to the “LINE OUT" position at the back of the analog
player.

Optional antenna connections

You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.

FM outdoor antenna

An outdoor antenna should be installed by a competent technician
only.

FM outdoor antenna
(not included)

75Q coaxial
cable

_

(not included) ,

\

FM ANT

(750)

7“

For United
Kingdom only:
Use the

¿^attachment

plug (included)

(T) Remove a piece of the outer vinyl

insulator.

(D Twist the shield braid to expose

the core wire.

@ Connect the shield braid and the

core wire as shown at the left.

Shield braid

For Australta and New Zealand

30 mm (iVis")

15 mm {'%/)«

GND FM ANT

AM outdoor antenna (not included)

Connect the outdoor antenna without removing the AM loop antenna.

Run 5 to 12 m of vinyl-covered wire horizontally along a window or

other convenient location.

AM outdoor antenna

(not included)

y----

(S)

1------- 5-12m----------------------- 1

AM ANT
EXT

For Ausiralia and New Zealand

1________ L

AM ANT
EXT

When the unit is not in use, disconnect the outdoor antenna to

prevent possible damage that may be caused by lightning. Never use
an outdoor antenna during an electrical storm.

This manual is related to the following products: