Using the sleep timer, Press sleep to select the desired time, To use two timers – Panasonic SC-CH75 User Manual
Page 30: Together, For your reference, To cancel the steep timer, To confirm the remaining time, To change the time remaining during operation, Using the record timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the sleep
timer
by remote control only
The system has a sleep timer so that you can fall asleep with the
music on and have the system stop by itself. When the set time
elapses, the system goes into the power standby mode. You have up
to 2 hours time available for listening and you can set the timer in
30 minute increments.
The following example in the figure shows how to set the system to
standby mode after 30 minutes.
SLEEP
While enjoying the desired source:
Press SLEEP to select the de
sired time.
0:30^1 ;00->1:30->2;00^OFF-----------
{The display changes each time the but
ton is pressed.)
Time setting
JJlfJ ^
¿3 ®
I ri- n
u-
J
s s / / O
D^U
i 1
Check “SLEEP" is displayed.
The system is turned off after the set time has elapsed.
To use two timers
together
The sleep timer can be used in conjunction with the play timer or
record timer.
Record timer and sleep timer
To go to sleep listening to a compact disc, and then to make a timer
recording from a radio broadcast,
© Program the record timer.
@ Switch on the power.
@ Start CD playback and adjust the desired volume.
@ Set the sleep timer.
Be sure to set the sleep timer to off before the timer recording
begins.
Play timer and sleep timer
To go to sleep listening to an FM broadcast, and wake up the next
morning listening to a compact disc,
© Program a CD for play timer.
(2) Switch on the power.
(3) Tune in the desired band and station, and adjust the volume.
@ Set the sleep timer.
Timer priority
The sleep timer always has priority.
Be sure not to overlap timer settings.
For your reference
• The play timer cannot be used in combination with the record timer.
•The volume of the play timer does not change if the volume of the
sleep timer is changed.
To cancel the steep timer
Press SLEEP to select "OFF”.
“SLEEP" goes out.
To confirm the remaining time
(only while power is ON)
Press SLEEP.
The remaining time will be displayed.
To change the time remaining during operation:
Press SLEEP to show the remaining time then press SLEEP to select
the desired time.
,
The sleep timer turns OFF automatically the moment you attempt to
edit-record a CD.