Nn computer — monitor connection, Rs-232c, Data interval < computer – Panasonic DT2750MS User Manual

Page 34: Rs-232c communication

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RS-232C communication

The DT-2750MS has an RS-232C connector on the rear panel. Users can control brightness, contrast, horizontal

centering, vertical centering, horizontal size, vertical size, color, tint, sharpness, volume, mute, input select,
degauss, color temperature, side-pincushion, trapezoid, power ON/OFF, memory recall, rotation, parallel, side-pin
corner, side-pin balance, white balance (user) and OSD control with a computer by connecting an RS-232C cable.

nn Computer — Monitor connection

RS-232C

® @ ® (2) ■

® C S ) ® © // D-sub9pin

Input connector

Protocol

/ Speed

Non-parity

Data

\ Stop bit

8 bit

1 bit

2400 bps, 9600 bps, 14400bps, 28800 bps Select \

+10 V(“0”)

-10 V (“1”)

Data interval

< Computer >

1. Continuous up/down command

110 ± 20 ms

2. Before another (new) command

—> Min. 300 ms

< Monitor >

Max. 20 ms