Rear panel, Rgb1 in connectors, Connections for component video equipment – Panasonic DT2750MS User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connections for component video equipment

Turn off the power switches of the video equipment

and/or your monitor if they are now on.

Connect the BNC cables for

and the RCA

cables for audio to the video equipment and the

monitor as shown in the following figures.

Note; These cables are not supplied with the

monitor.

If it has not been installed, first connect one end of

the power cable to the monitor and then the other
end to the AC outlet*.

Turn on the power switches of the monitor and the

video equipment.

Select “DTV” by pressing front button

DTV

pressing the

DTV

key on the remote control unit

(see page 21).

Caution:

*lf the AC outlet is of the two prong type,

please consult with a licensed
electrician.

Rear panel

RGB1 IN connectors

AC outlet