When “link” doesn’t appear, Lisiliillielllisilsieii – Panasonic SC-CH150 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
liSiliilliEllliSilSiEii#
When “LINK” doesn’t appear;
1. Press EDIT.
2. Press ■ to indicate ‘‘CLEAR" on the display.
3. Make an edit-recording from the first step.
To program the desired tracks and link them:
1. After having edit-recorded the first CD, press OPEN/CLOSE and
replace the CD.
2.
Press PROG, on the remote control unit, and select a desired
track using or
3. Within 5 seconds, press PROG, on the remote control to enter
what has been programmed.
4. Press EDIT.
5. Press REC.
When “OVE” appears on thé display düring
linking:
This indicates that the length of even the shortest track on the CD
exceeds the remaining time on the tape.
Program a track which is shorter than the remaining time (see "To
program the desired tracks and link them;" above), or press ■ to
release the link function.
27