Panasonic SC-CH150 - Manual (Page 23)

a
Notes on tapes:
Normal, chrome and metal tapes can be used (for recording and
playback),
•This system automatically identifies the type of tape being used
and sets the bias (for recording) and equalizer.
•The recording level is set automatically.
Run the leader tape past the heads and set up the system so that
recording can be commenced immediately. (This is not necessary
when edit-recording CD tracks.)
How to run the leader tape past the heads:
Magnetic section
(on which sound can be recorded) ■
Leader tape (on which sound cannot be recorded)
Notes on CD recording methods:
There are 3 methods. Choose the one that best suits your needs.
To edit tracks on a CD in their original
sequence (see pages 24-25)
•Tracks are not interrupted at the end of the tape.
•A blank section can be left at the end of the tape.
Blank section
Side A
Side В
Track 1 2 3 4
When “ERROR*’ appears on the display during
recording operation:
It means that the tape is not installed, or you install the tape which
has no erasure prevention tabs.
Using Dolby NR reduces tape hiss in the high-frequency range. It
boosts the level of the high-frequency program content during re­
cording, and lowers it by the same amount during playback, simulta­
neously reducing high-frequency noise Incurred during the recording
process.
B type;
Noise is reduced to about
1
/
3
. Use this type when playing a tape in
the Dolby NR mode.
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation,
"DOLBY" and the double-D symbol tU are trademarks of
Dolby Laboratories Licensing Corporation.
If you record with your desired sound field or tone quality, it is not
effective to the recorded sound.
To edit a collection of CD singles on one tape
(see page 26)
•This function can be used to record further tracks on the part of the
tape which is still free after all the tracks of a CD have been
recorded.
•Tracks are interrupted at the end of the tape side B.
•A blank section can be left at the end of the tape side A.
First CD Second CD Blank section
Side A
Side В
I I I
Track 1 2 1 .
[
1 2 1
_________________) I______________ I
Third CD Fourth CD
To record tracks without the editing function
(see pages 28-29)
•This function can be used to record from midway through a pre­
viously recorded tape.
•Tracks are interrupted at the end of the tape.
•A blank section cannot be left at the end of the tape.
Side A 11 Track 1
Side В
Remainder of track 5
23