Panasonic SC-CH150 - Manual (Page 25)

To stop edit-recording at any
time:
1. Press REC.
The CO play is stopped automatically
as well.
2. Press ■ to indicate "CLEAR” on the
display.
What is the ATLS function:
"ATLS" stands for Automatic Tape Level Setting, and It refers to the
function which automatically sets the recording level. No sound is
heard while ATLS is operating.
1. It scans the tracks on the CO and finds the point with the maxi­
mum sound level.
2. It sends the peak signal to the cassette deck section and auto­
matically sets the recording level.
3. Recording now starts.
When edit-recording Is completed:
Both the CD and tape stop automatically.
The LINK display indicates that tracks on. another CD can .be re­
corded on the remainder of the tape.
Proceed to step 2 on page 26.
To program and edit-record desired tracks only:
1. After step 3, press PROG, on the remote control unit.
2. Select the desired tracks using or
3. Within 5 seconds, press PROG, on the remote control unit and
enter the programmed tracks.
You can edit up to 18 tracks.
4. Perform steps 4 to 8.
•Use a tape which is under 99 minutes In length. A long blank
section may be left on the top side if a tape longer than this is used.
•It is not possible to edit-record the tracks on a CD containing 37 or
more tracks. ("ERROR” display will appear.)
In this case, record without edit function.
(Synchro recording—see page 28.)
25