Panasonic SC-CH150 - Manual (Page 24)

■ V
Editing CD tracks in their originai order
Up to 36 tracks can be edit-recorded.
The tape is automatically forwarded to the position where the tracks
can be recorded,
7
6 ItTW
START/STOP
Press MENU.
EDIT Press EDIT.
The length of tape required for all the
tracks to be recorded now appears on
the display.
Lights.
■TAPE LENGTH+
(EDIT)
Press “ or + to Indicate the
length of the tape used.
/_ “
Hb
Use a tape which is longer than the CD's
total play time,
EJECT
D0L8Y NR
%
8 liTEfl
START/STOP
Press EJECT and insert the
tape.
When the editing starts, the cassette
deck automatically advance the tape to
which the recording can be made.
Press DOLBY NR to set the
Dolby NR system on or off.
L IWT I
(SBiQiBisiiiiizia)
O VI
Lights.
This should be off when the recording is
not going to be made using the Dolby NR
system.
Press REC.
ATLS (see next page) starts automati­
cally and when ATLS has been com­
pleted, edit-recording begins.
iiO
S) HI IS IB IS Bl
IBOLBVBIIB V on
It takes a little while (approx. 70 sec­
onds for a 60-minute CD) after the
button Is pressed for the recording to
actually start.
Your attention is drawn to the fact that recording pre-recorded
tapes or discs on other published or broadcast material may
infringe copyright laws.
24