Panasonic WZ-AD96 - Manual (Page 31)

C o n n e c t i n g t h e S y s t e m
C
onnecting the
S
ystem
System examples are shown in following pages.
Connection - 1: Connecting with the DA7 Digital Mixer
Connection - 2: Connecting with the ADAT & BRC
Connection - 3: Connecting with TDRS
Connection - 4: Connecting with Pro Tools
C onnecting mn the DA 7 D igital M ixer (C onnection 1)
Wordclock master ; WR-DA7, AD Converter: To sync to DA7
• Connection
1. Connect between Wbrdclock-Out (75n=ON) on the DA7 and Wordclock-In
on the AD converter with a BNC cable.
2. Connect between Wbrdclock-Out on the AD converter #1 and Wordclock-
In on the converter #2 with a BNC cable.
3. Connect between ADAT-Outs on the AD converters and ADAT-1 ns on the
WR'ADAT cards installed in the DA7 with two optical cables.
4. Connect between ADAT-Out on the ADAT card #3 and DIGITALT-In on the
ADAT with an optical cable.
5. Connect between ADAT- IN on the ADAT card #3 and DIGITALT-OUT on
the ADAT with an optical cable.
6. Connect between the DA7 and the DAT: Rec Out to AES/EBU In and 2TR A
In to DAT Out with two XLR cables.
• Setting
1. On the DA7, set the SOURCE SELECT to “INT 44.1 K” or “INT 48 K”, and
set the SLOT 3 of the DIGITAL INPUT SELECT to INPUT 9-14 and 15/16, in
the [D-I/0> INPUT SET] window.
2. Set SLOT 3 to INS in the |D-I/0>T0 SLOT] window to function SLOT 3 in
send-return mode.
3. On the front panel of the AD converter, select “EXT” by pressing the
CLOCK button to be slaved to DA7’s wordclock. Set both the DIP switch
#7 and 8 to ON to meet the REF level of -l4dBFS.
3 2