Panasonic WZ-AD96 - Manual (Page 12)

C h a p t e r 2
MJiJOR CONTROLS
and
THEIR FUNCTIONS
Buttons sitk-printed half gray on the panel, here marked with < > brackets
are assigned double operation modes: normal mode and shift mode.
Indicators also have deferent function according to the operation modes.
During the < Shift Mode> all three Word Length Indicators light to identify
the operation mode. The operations are described after the
normal mode operations.
FRONT PANEL (NORMAL MODE)
© Power Switch and Power Indicator [POWER]
Turns on or off the power. The indicator lights while the power
power is on.
0 Peak Hold LED Button [PEAK HOLD] AD96 only
Peak hold time changes each time the button is pressed as follows.
0 second (LED: OFF) —> 2 seconds (LED: Green)
infinity(LED: Red) —> 0 second (LED: OFF)
0 Meter Mode Selection LED Button [METER ZOOM] AD96
only
Meter mode toggles between the normal display and zoomed display
each time the button is pressed.
Normal (LED: OFF) -> Zoom (LED: Green)
—> Normal (LED: OFF)
PEAK
HOLD
fool
METER
ZOOM
0
1 AJST 1
® Frequency Selection Button [FREQ]
When CLOCK is set to CRYSTAL the frequency is selected as
follows every time the button is pressed. The respective indicator
lights. 44.1k
48k —> 88.2k 96k —> 44.1k
When CLOCK is set to EXT and the unit follows 48k or 96k, the
frequency is selected as follows every time the button is pressed.
The respective indicator lights. 48k —>
96k —> 48k
When CLOCK is set to EXT and the unit follows 44.1k or 88.2k,
the frequency is selected as follows every time the button is
pressed. The respective indicator lights. 44.1k —> 88.2k —> 44.1k
® Frequency Selection Indicator [FREQ] [44,1k 48k 88.2k 96k ]
The upper LED lights when 44.1 kHz (Green) or 88.2 kHz (Red) is selected.
The lower LED lights when 48 kHz (Green) or 96 kHz (Red)is selected.
FREQ
44,1k (ZZ]| 88Zk|
48k tZDl 96k I
□
I CH-SEL I
1 3