Panasonic WZ-AD96 - Manual (Page 17)

G e t t i n g S t a r t e d
(g) DIP Switch[l 2 3 4 5 6 7 8 ON OFF]
An 8-bit DIP switch is provided for settings . See page 21 for the ^
setting. ^ ®
ID I 't
rn I cn
fn~~l cy
mzi -
@ ADAT Output [ADAT OUT]
This optical connector supplies digital outputs for ADAT
OFF ON
@ Wordclock Input Connector [WORD CLOCK IN]
This BNC accepts the wordclock supplied by an external device. To
synchronize the internal clock to the wordclock in, select EXl' by
the CLOCK button, then select a frequency by the FREQ button.
@ Wordclock Output Connector [WORD CLOCK THRU]
This BNC supplies the wordclock looped through the WORD
CLOCK IN.
S word aocr
@) Digital Output Connector [AESl AES2 AES3 AES4 AES/EBU DIGITAL
OUTPUT]
These XLR connectors supply AES/EBU digital outputs. Output channels for
Dual AES mode are selected from a set of 1, 2, 3 and 4, or 5, 6, 7 and 8 by
the FREQ/CH SEL button in the shift mode operation.
to .BKE ^ Qliia ^ EiE ^
-------- AESiBU DIGITAL OUTPUT--------------------
@ Grounding Terminal [SIGNAL GND]
Connect with other devices' GND to level the mutual ground potential if
required.
^ AC Inlet [AC IN]
Connect the supplied power code.
SIGNAL
GND
AC IN
1 8