Panasonic WZ-AD96 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
G e t t i n g S t a r t e d
S
ignal
Fioxii
The chart shows how the analog inputs are converted to digital outputs.
The supplied analog signals are adjusted in the level while going through the
amplifier stage responding to the trimmer positions on the front panel.
The ADC transforms analog signal to digital data. The digitized audio data are
fed to word length, RliF level adjustment stages and then to meters.Word
length is set on the front panel while the REF level is selected on the rear
panel. Meter functions are controlled by buttons on the front panel and DIP
switches on the rear panel.
After passing the multiplex stage, the digital audio data are converted to the
selected format, then supplied to AESl-4 and ADAT connectors. Output
channel selection is made on the front panel in the shift mode operation.
On the bottom of the chart, the clock system is shown.
2 0